New Products
Single channel shrike
ECi-161 Single circuit Electronic Exploder; is a light weight two hands fire system. It provides the same reliability of four circuit Shrike. It can check the continuity of firing circuit. The unit is primed before fire and the firing is done by simultaneous pressing of the fire and prime buttons. It provides sufficient energy to overcome a total parallel-wired circuit load up to 400 ohms. This is the load of a standard demolition cable (DEF STAN 61-12 Part 17 or equal) of 4 Km.
Key Features
Specifications
Key Features
- Firing circuit continuity test facility.
- Indicator LEDs – to confirm continuity OK and confirm Primed.
- Safety recessed pushbuttons for Test, Prime and Fire.
- Two pushbuttons need to be depressed with two hands to fire.
Specifications
| Item | Specification | Item | Specification |
| Output Volts | 350 V | Operating temp | -20°C to 60°C |
| Output current | 10 A peak | Storage temp | -40°C to 60°C |
| Tim to prime | Less than 4 sec | Number of firings | > 100 per batteries |
| Output Load | 400 Ohms | Weight | Less than 0.3 Kg |
| Output connections | Option-1 Spring Loaded push button. Option-2 Self- Piercing connectors (no need to crimp wire ends). | ||
| Battery | Standard Model ECi-161 with PP3 battery. Rechargeable Model ECi-161C with built in battery. | ||
| Dimensions | 160 x 65 x 45 mm | ||
| Firing load | Up to 400 Ohms | ||
| Cable length | Fire up to 6 Km of DEF STAN 61-12 Part 17 cable | ||
